Vibrating Feeder operation and maintenance notice

Vibrating  Feeder operation and maintenance

Vibrating Feeder is a kind of linear direction feeding equipment. Our vibrating feeder is designed and built to withstand the toughest work in a quarry or mine by matching different applications; This vibrating feeder series is designed particularly for continuous use with any hard and abrasive materials through uniform flow. Vibrating feeder works to continuously and evenly feed lump, particle and powdered materials from hopper to belt conveyer, bucket elevator, screens and crushing machines, etc. Step less regulation is available for SBM’s vibrating feeder to automatically and centrally control the feeding volume.

Vibrating Feeder is a commonly used feeding equipment, during the installation and use of vibrating feeder, some essential knowledge must be known.

  1. Vibrating feeder is not allowed to be used where is likely to cause injury to persons premises.
  2. please install the vibrating feeder device using the hanging device which can withstand the weight of vibrating feeder, must enure that equipment hanging institutions fully carry weight, and have a certain safety factor. So as to avoid? the risk of falling of vibrating feeder device.
  3. when vibrating feeder is in the hanging and maintenance of the equipment, not allow the person standing in the bottom to that it may fall, causing no personal injury.
  4. maintenance of the feeder must be completely off the power, in order to avoid an electric shock casualty officers.
  5. Feeder equipment operation must be connected and ground, in operation every day should be regularly check the wiring and insulation wire skin, anti-shock on the leakage and accidents.
  6. when the vibrating feeder load must be running low current operation, so as to avoid damage to equipment, core impact, so under normal circumstances, do not run empty.

Vibrating Feeder PDF Download

Contact E-mail: